CPD-LINE complements the CPD series by adding a compact line array system to existing product line-up. The power for the three drivers of the CPD-LINE are produced from the latest generation “cold” PWM amplifier for low-mid speakerand a FET-amplifier with the best audio characteristics for the HF compression driver. Each 8”- low-mid speakerreceives 200Wrms/8ohms and the HF drivers receive 100Wrms/16ohms. With this 500Wrms total power, a single CPD LINE system can produce 125dB SPL peak.
What makes the CPD LINE unique: after you choose the layout of the system, either from our engineered setup charts or your experience, the necessary set-ups for different lengths and curvings are pre-set in the loudspeaker software, and easy to access. You simply choose the number of speakers, the angles between them, and the system creates the optimum acoustic distribution for the venue.
Every room has unique acoustic properties and issues, with the CPD system adjusting each individual speaker to compensate for these acoustic issues is made easy. Each loudspeaker, with its individually assigned IP address, can be individually adjusted and monitored with KS AUDIO REMOTE 3 Software over an Ethernet network. Each CPD LINE loudspeaker has an integrated network switch which allows the speakers to be linked. All CPD LINE adjustments can easily be made on your PC.
The speaker cabinet construction is, like any KS AUDIO system, built from birch plywood with PU coating. All RAL colors available. There are 2 rear mounted handles and integrated C Rigging flyware to allow for a variety of mounting options
The rear mounted 2-way DSP-controller / amplifier operates very efficiently without the need of a cooling fan. The FIR crossover and filters are specially matched to the drivers, with corresponding compressors and limiters to ensure safe operation. The electronically balanced input is in the form of XLR F+M connectors. The control panel also has a digital volume control to individually adjust for each venue and a digital delay up to 140ms or 40m, for time alignment and decentralized PA systems. There is a Lo Cut switch for speech reproduction or for adding a subwoofer to the system. Operation and set-up with a PC using the KS AUDIO REMOTE3 Software is also possible over an Ethernet connection.
CPD LINE power supply operates on AC 110-240V with soft-start and Powercon in/outs.
|